Shipping throughout Russia and to other countries

Pressure gauges BD DM, DME, DME, MDME, etc.

A general technical pressure gauge with a tubular spring, type DM (modification 1) is designed to measure the pressure of gaseous and liquid, non-highly viscous and non-crystallizing media that are not aggressive towards copper alloys (water, steam, gas, oil, kerosene, gasoline, diesel fuel, etc.).

A general technical pressure gauge with a tubular spring, type DM (modification 2) is designed to measure the pressure of gaseous and liquid, non-highly viscous and non-crystallizing media that are not aggressive towards copper alloys (water, steam, gas, oil, kerosene, gasoline, diesel fuel). In places with increased vibration or in the presence of pulsations.

General technical pressure gauges with a tubular spring, type DM (modifications 3 and 4) are used in difficult operational and technological conditions, including in places with increased vibration and pulsation in the food, brewing and pharmaceutical industries, in cryogenic engineering, chemical and petrochemical industries, in nuclear and refrigeration plants, in pumps, presses, compressors, turbines, diesel engines, etc.

Recommended for use with media separators: RM5319, RM5320, DA, DB, DE, DF, DH, DJ, etc.

A general technical pressure gauge with a tubular spring, type DM (modification 5) is designed for use in areas with increased vibration and pulsation. 4x overload, safe housing (S) SOLID FRONT.

A safety pressure gauge with a solid, high-strength protective wall is recommended for use in conditions of accidental, short-term overloads not exceeding 4 times the value of the pressure measuring range. The overload pressure value is displayed on the scale.

The general technical pressure gauge with a tubular spring, type DM (modification 6) is made according to the American standard ANSI/ASME - B 40.1, polypropylene housing with a measuring system made of stainless steel. steel, a strong protective partition and the possibility of mounting on the wall.

The pressure gauges demonstrate good stability under cyclic loads and resistance to accidental overloads during vibrations. Recommended for use with media separators: PM5319, PM5320, DA, DB, DG, DJ, etc.

A general technical pressure gauge with a tubular spring, type DM (modification 7) for measuring the pressure of gaseous and liquid, non-highly viscous and non-crystallizing media, non-aggressive towards stainless steel. steel (ammonia, alkaline and saline solutions). It is made entirely of stainless steel. The recommended pressure measurement range is up to 75% of the scale.

An exemplary pressure gauge with a tubular spring, type DM (modification 8) for accurate measurements, in a stainless steel case, used in the fields of state metrological control and the state system of industrial devices and automation equipment for measuring overpressure of non-aggressive, non-crystallizing liquids, gas, steam.

Electric contact pressure gauge, type DME (modification 9) is designed to measure the pressure of gaseous and liquid, non-highly viscous and non-crystallizing media that are not aggressive towards stainless steel. become. It provides control of external electrical circuits from a direct-acting signaling device by turning on or off contacts in alarm circuits, automation and blocking of technological processes.

Diaphragm pressure gauges, type DMM, DMME (modification 1 and 2) are designed for measuring overpressure and/or dilution of gases and liquids. The design of the sensor element of the pressure gauge allows you to work with complex measuring media, such as aggressive, polluted and viscous media.

Pressure gauges, thrust meters, and diaphragm pressure gauges of the NM, TM, and HNM types are designed to measure overpressure and/or dilution of air and gaseous dry media.

Differential diaphragm pressure gauges, type MDM, MDME are designed for measuring the pressure difference between liquids and gases that are not aggressive towards the measuring system.

Differential pressure gauges with a magnetic piston, type MDP, MDPE are designed for measuring the pressure difference between liquids and gases that are not aggressive towards the measuring system.

MDM 2000 differential pressure gauges (Magnehelic analog) are low pressure differential pressure gauges, which are an analogue of the well-known DWYER brand Magnehelic model. The device has managed to preserve and increase the scope of application, add strength and reliability to the design, as well as, surprisingly, significantly reduce the price.

Electrical contact pressure gauges, type DME (modifications 2010 and 2005) are used to control external electrical circuits (alarms, automation and blocking of technological processes) from a direct-acting alarm device. Distinctive features:

  • The optimal price/quality combination.
  • A contact group with magnetic preload in the standard version.
  • The accuracy class is 1%. Dust and moisture protection of the housing: IP 54.

Differential pressure gauge with Bourdon tube, two independent measuring systems, type DM is designed to measure pressure differences in gaseous and liquid media. It is suitable for measuring pressure loss in filters in air conditioning and ventilation equipment, as well as for use in heating systems and pipelines (measuring pressure drop during passage of filters, pumps, etc.).It can be designed for aggressive environments.

Pressure gauge with tubular spring for ultrapure media, type DM (modification 3) is used for liquid and gaseous media, in the semiconductor industry, gas distribution systems in processes with high purity requirements.

DOCUMENTS

All BD products

The group "New Technologies" offers for review the products of the plant BD: control and measuring apparatus for measuring pressure, temperature and flow in gaseous and liquid, aggressive, highly viscous, toxic, high-temperature and other media, including R12, R22, R134a refrigerants
  • Pressure gauges BD
    Pressure gauges
    DM, DME, DME, MDME, etc.
  • Membrane separators BD
    Membrane separators
    DA, DB, DG, DD, DF, DH, DI, etc.
  • Thermometers BD
    Thermometers
    TB-ros, TB, TGP, TT-V, etc.
  • Pressure switch BD
    Pressure switch
    RD-X, RDD-X, DPS-BD, etc.
  • Pressure sensors BD
    Pressure sensors
    DB-X, DB PD-R, DB-FM, DB-MD, etc.
  • Temperature relay BD
    Temperature relay
    TAM-BD, TAM-2-BD, etc.
  • Flow relay BD
    Flow relay
    FS-1R, FS-2R, etc.
  • Thermomanometers BD
    Thermomanometers
    TMTB BD and others.
  • Accessories BD
    Accessories
    Valves, taps, adapters, etc.

About BD

DB is a Russian company that is part of the international company DB, which produces high-quality devices for measuring pressure and temperature in industry. The concentration of efforts in the field of pressure and temperature measurement allows DB to offer its Customers a variety of engineering solutions quickly and cost-effectively.

  • WIDE APPLICATION

    DB products meet the requirements of high accuracy and quality, are used in the energy, gas, oil, metallurgical, chemical industries, aircraft and shipbuilding, housing and communal services, etc.

  • HIGH QUALITY

    Modern production, qualified personnel and a flexible approach allow us to meet a wide range of needs and choose both standard cost-effective solutions and individual ones

  • WARRANTY AND SERVICE

    The DB company maintains an optimal price/quality ratio, and Customers can always count on support, engineering advice and receiving information materials

Information Board BD

Learn more about our products BD.
  • Questionnaire for DB pressure gauges из каталога BD
    Questionnaire for DB pressure gauges
  • Questionnaire for DB thermometers на сайте BD
    Questionnaire for DB thermometers
  • Questionnaire on DB membrane separators от производителя BD
    Questionnaire on DB membrane separators
  • Questionnaire for DB pressure sensors на сайте BD
    Questionnaire for DB pressure sensors
  • Questionnaire on DB pressure switch из каталога BD
    Questionnaire on DB pressure switch

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: