Accessories BD Valves, taps, adapters, etc.

Vertical needle valve, type S004 has brass and carbon steel versions for different pressures.

• Vertical needle valve, type S004. Technical description

Three-way cranes for liquids, gas and steam. It is recommended to use when installing pressure gauges, PTFE seal

• Three-way cranes. Technical description

The push-button valve VE-2 is designed for gases and non-aggressive liquids, with automatic shut-off and pressure relief from the pressure gauge.

• Push-button tap VE-2. Technical description

Bellows tubes, selective pressure devices are designed to protect pressure gauges from pulsation of the measured medium

• Bellows tubes. Technical description

Brass and stainless steel adapters are designed for the installation of devices with a fitting connection (pressure gauge, pressure sensor, media separator, etc.) in the place of pressure measurement, if the thread of the device is different from the thread of the installation site.

• Brass and stainless steel adapters. Technical description

Adapters (welded adapters) for pressure gauges, thermometers, flow relays

• Adapters (welded adapters). Technical description

Gaskets (copper, fluoroplastic, paronite) are designed for the installation of a pressure gauge

• Gaskets (copper, fluoroplastic, paronite). Technical description

The barrel. Connection G 1/2 out x G 1/2 out

Ball valve, coupling-release, lever are designed to block the flow of the working medium (water-steam)

• Ball valve. Technical description

Pressure gauge valve, type MV is designed for installation, operation and replacement of pressure gauges, primary converters (sensors) and other instrumentation devices. It is possible to connect various components (water, air, steam, petroleum products, food media, as well as other chemical solutions and gases that are non-aggressive with respect to the material of the housing, oil seal and other internal parts of the valve), provides reliable insulation, blocking and draining of condensate.

• Pressure gauge valve, type MV. Technical description

Valve block BV, modification 1 (manifold) is designed for isolation, pressure equalization for differential measuring instruments. It is possible to connect various components (water, air, steam, petroleum products, food media, as well as other chemical solutions and gases that are non-aggressive with respect to the material of the housing, oil seal, and other internal parts of the valve block), provides reliable insulation, blocking and draining of condensate.

• Valve block, type BV. Technical description

The pressure gauge valve MAV 16270 is designed specifically for high pressures (PN100) for gas, but it can also be used for other gaseous and liquid media that are neutral to the crane materials. Has a permit from the Federal Agency for Environmental and Nuclear Supervision, a certificate.

Welded adapter (steel) with external thread G1/2 and M20 x 1.5 for 3-way valve, ball valve, bellows tube, loop tube.

• The adapter is welded. Technical description

Cooling element under t °C of medium max +200 °C. Stainless steel material. steel, G1/2B

Sleeves made of stainless steel 12x18H10T are designed for the installation of thermometers on technological equipment, are used when using devices in aggressive measured environments, high temperatures, pressure. Working pressure for stainless steel sleeves 25MPa or 250 bar

• Sleeves made of stainless steel 12x18H10T. Technical description

Capillary lines, type KL are designed for hydraulic connection of the separator and the pressure measuring device if they are mounted at a distance from each other. The second important function is the cooling of the measuring fluid at the inlet to the device in case of operation of the separator in high–temperature working environments.

The device is a thin metal tube, possibly made in a metal braid (stainless steel protective casing. steel) with fittings at the ends

• Capillary lines, type KL. Technical description

Pulse tube for pressure switches RD-2, RDD-2, DEM-102-DB for pressure supply and ease of installation. Construction with threaded internal and external connections of any length. The copper tube withstands pressure up to 86 bar and at the same time bends easily, which allows it to be laid in place from the pressure sampling point to the device without much effort and additional tools.

• Pulse tube for pressure switch RD-2, RDD-2, DEM-102-BD. Technical description